Karbonn Smart Tab 8 & 10 ROM's ,Root, Recovery,etc.

Karbonn Smart Tab 8 & 10 Stock Plus Rom V1.2 & Karbonn Custom v 1.0.1 Rom by Fuser Invent


To install:-

Stock Plus ROM

•Copy the zip to your SD Card.
•Boot into Stock Recovery
•Factory Reset the tab
•Apply update through Ext 
•Select the Karbonn Stock Plus zip
•After completion Reboot system now.


Karbonn Custom ROM v 1.0.1

•Install TWRP recovery
•Boot into TWRP
•Copy the .zip over to your SD card
•Factory reset your tablet
•Flash the zip
•If you want to switch SD with Internal, flash crystal_clear_v1.5_sd_switch.zip
•Reboot System Now

Features are listed in the particular thread.


Stock ROM v 1.2 for ST8 & ST10


Custom ROM v 1.0.1 for ST8 and ST10



Karbonn Stock ROM Plus v1.1 by Fuser-Invent for Smart Tab 10

It has been mainly made for people who have bricked their Smart Tab 10's(can save you from sending the tab to the Service Centre) but others can also use it as it will enhance the usability and speed of the device.

Features:-

i)It's the Modified Stock ROM which is flashable through Stock Recvoery.
ii)Bloatware Removed.
iii)Init.d Tweaks enabled.
iv)Governor Tweaks added.
v)Touch Screen Tweaks added.
vi)Much faster than the Stock ROM. More Internal Memory and RAM available.
vii)Runs HD Games much smoother.
viii)Pre-Rooted.
ix)Internal External Memory Swapped.
x)Much efficient in Battery handling.

To install:

i)Copy the zip to your SD Card.
ii)Factory Reset the tab
iii)Apply update through Ext 
iv)Select the Karbonn Stock Plus zip
v)After completion Reboot system now.




TWRP for Smart Tab 8 & 10 by Ozadroid

TWRP or TeamWin Recovery Project is a Custom Built Recovery similar to ClockworkMod but with touch functionalities.

Download



Rooting


Download the Crystal_Root.zip from here and copy it to a microSD card (do NOT extract it)
Charge up the battery in your Crystal, Power Off and remove the charger cable.
Insert the microSD card into your Crystal
Get into Recovery mode.
In the recovery you can move with the Volume- button, you can select with Power or Volume+
Select the apply update from EXT option
Select the Crystal_Root.zip, this will install the package
Wait for the update to finish
Select reboot system now

This is a tried and tested method and has worked for everyone till now.


Swapping External to Internal Memory


The fact that our devices have only 1.51 GB of Internal Storage limits the capabilities of our devices. Especially with HD Games. But after swapping this won't be a problem anymore.


Download the file Vold.rar from here.
Extract the file vold.fstab and paste it to your SD Card.
Now with ES Explorer Mount RW as writable and tick up to root(You have to root and have to know how to move into root).
You should now be able to access the root.
Copy the vold.fstab from Sd card.
Press back and paste it in system\etc.
It will ask you to overwrite. Allow it to do so.
Reboot.
I myself have tried it and it worked wonderfully.
That's it. Enjoy HD games now. 


Lag-free Tweak


Install SetCPU app
Download the file Setcpu.txt from here
Paste it into the root of your SD Card
Open SetCPU, first change the governor from "conservative" to "performance2"(This is the most important thing)
Click on options button(three dots) and then click Device Selection
Select Custom Frequencies
Now Set Min frequency to 48 MHz and Max frequency to anything according to your preference(Now you'll have the choice of setting the frequency upto 1.5 GHz)
When you wan't to conserve more battery lower the Max Frequency(while browsing or listening to music maybe) and when playing HD games up the Max Frequency(Most games will run perfectly with even 1200 MHz)

Note:-48MHz of Min frequency will give more battery in in standby mode.
And now you call play games like Dead Trigger on Ultra High graphics settings without lag on 1.4 or 1.5 GHz.
Try not to Clock the CPU above 1.2 GHz for a long time as it could cause heat issues. The governor itself should speedup everything for you.


Enjoy. 

0 comments:

Post a Comment